How To Install A Wax Ring Toilet
Call Today!!! 408-282-7026
Wax Rings
Wax Rings
Y'all may have heard of wax rings before. You lot may even know that they go betwixt the lesser of the toilet, and the closet flange (the flange in the flooring)… but practice you know what they are really for?
The mutual misconception is that they are meant to provide a leak-proof seal between the toilet and the floor. The truth is that while they do keep the toilet h2o from splashing onto the floor, they are not really designed to provide a "leak proof" seal. The actual office of a wax ring is to provide an aroma proof seal.
A toilet has an internal trap, that holds water and keeps the sewer gases out. A seal also needs to be placed between the sewer and the toilet, and that is what the wax ring does. If y'all have ever had a chief sewer line fill-in, and saw water leaking from under your toilet, that does not mean that the wax ring was bad. Information technology just ways it was not designed to keep the water out… at to the lowest degree non water with any force (or weight) behind information technology.
What Might Cause a Wax Ring to Go Bad?
Wax rings tin can get bad for a number of reasons, although historic period is not usually one of them. Actually, in ideal conditions, a wax band should never become bad. There are, however some things that may cause them to no longer function properly.
One very common cause of wax ring problems is loose toilets. If the toilet is not firmly mounted, or gets loose to the indicate where information technology rocks a bit, it tin can cause the wax ring to lose its seal. When installed, a wax ring is compressed to fit the flange and the toilet, creating the seal. If a toilet rocks, the wax band is already done compressing, and may non recoup for the motion.
I mentioned the mainline fill-in scenario earlier. If water has seeped past your toilet, onto your flooring, yous will desire to replace the wax ring. Once the h2o seeps past it, the seal is pretty much lost. If y'all have your toilet removed for some reason, you should always replace the wax band. Never reuse one.
Other issues that may occur is when at that place are problems with the closet flange… specifically the acme in relation to the toilet. This is very mutual in homes with tile floors. If the abode was built with a sparse floor covering (such equally linoleum), installing tile or other thicker floor roofing volition leave the closet flange low. This creates an increased infinite betwixt the toilet and the flange.
When the infinite between the toilet and the flange are too far autonomously for a wax ring to do a practiced job of compressing to fit, many people volition attempt using two wax rings. Sometimes this works, and sometimes information technology does not. While it is the least expensive way to go about information technology, a better way would be to use special flange heighteners to raise the flange height then that a proper seal can be fabricated with only i ring.
In that location you lot have it… everything y'all ever wanted to know virtually wax rings, and then some. If you still have questions or are ready to replace yours, give Gogo Rooter Plumbing a telephone call. We will take that pesky wax ring replace in no time!
Phone call 408-282-7026
Plumbing San Jose and the Surrounding Areas
Source: https://www.gogorooter.com/wax-ring-san-jose-replacement-installation/
Posted by: kileswenoboy75.blogspot.com
0 Response to "How To Install A Wax Ring Toilet"
Post a Comment